Graphene Based Biomedical Composite Coatings Produced by Electrophoretic Deposition on Titanium
DOI:
https://doi.org/10.18321/ectj189Abstract
The biocomposite hydroxyapatite/graphene (HAP/Gr) and silver/hydroxyapatite/graphene (Ag/HAP/Gr) coatings were electrodeposited on titanium substrate using the electrophoretic deposition (EPD) technique to produce bioactive coating with improved mechanical characteristics and corrosion stability in simulated body fluid (SBF). The electrodeposited coatings were characterized by scanning electron microscopy, Raman spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, X-ray photoelectron analysis, nanoindentation test and electrochemical impedance spectroscopy. Both HAP/Gr and Ag/HAP/Gr coatings exhibited reduced surface cracks, better mechanical resistance, enhanced thermal and corrosion stability, as well as bioactivity No antibacterial activity against Staphylococcus aureus and Escherichia coli was verified in the case of HAP/Gr coating, while Ag/HAP/Gr coating exhibited antibacterial activity indicating the high potential for biomedical applications. Both coatings were classified as non-cytotoxic against healthy peripheral blood mononuclear cells (PBMC).
References
[2]. A.R. Biris, S. Ardelean, M.D. Lazar, E. Dervishi, F. Watanabe, A. Ghosh, A. Biswas, and A.S. Biris, Carbon 50 (2012) 2252–2263.
[3]. L. Zhang, W. Liu, C. Yue, T. Zhang, P. Li, Z. Xing, and Y. Chen, Carbon 61 (2013) 105–115.
[4]. J. Liu, H. Yan, M.J. Reece, and K. Jiang, J. Eur. Ceram. Soc. 32 (2012) 4185–4193.
[5]. T. Kuilla, S. Bhadra, D. Yao, N.H. Kim, S. Bose, and J.H. Lee, Prog. Polym. Sci. 35 (2010) 1350– 1375.
[6]. S.F. Bartolucci, J. Paras, M.A. Rafiee, J. Rafiee, S. Lee, D. Kapoor, and N. Koratkar, Mater. Sci. Eng. A 528 (2011) 7933–7937.
[7]. M. Belmonte, C. Ramírez, J. González-Julián, J. Schneider, P. Miranzo, and M.I. Osendi, Carbon 61 (2013) 431–435.
[8]. Y. Liu, Z. Dang, Y. Wang, J. Huang, and H. Li, Carbon 67 (2014) 250–259.
[9]. G. Manivasagam, D. Dhinasekaran, and A. Rajamanickam, Recent Pat. Corros. Sci. 2 (2010) 40–54.
[10]. S. Baradaran, E. Moghaddam, W.J. Basirun, M. Mehrali, M. Sookhakian, M. Hamdi, M.R. Nakhaei Moghaddam, and Y. Alias, Carbon 69 (2014) 32–45.
[11]. M. Li, Y. Wang, Q. Liu, Q. Li, Y. Cheng, Y. Zheng, T. Xi, and S. Wei, J. Mater. Chem. B 1 (2013) 475–484.
[12]. L.M. Rodriguez-Lorenzo, L. Benito- Garzón, F. Barroso-Bujans, and M. Fernández, Key Eng. Mater. 477 (2008) 396–398.
[13]. J. Zhu, H.M. Wong, K.W.K. Yeung, and S.C. Tjong, Adv. Eng. Mater. 13 (2011) 336–341.
[14]. S. Kim, S.H. Ku, S.Y. Lim, J.H. Kim, and C.B. Park, Adv. Mater. 23 (2011) 2009–2014.
[15]. H. Liu, P. Xi, G. Xie, Y. Shi, F. Hou, L. Huang, F. Chen, Z. Zeng, C. Shao, and J. Wang, J. Phys. Chem. C 116 (2012) 3334–3341.
[16]. A.R. Biris, M. Mahmood, M. Lazar, E. Dervishi, F. Watanabe, T. Mustafa, G. Baciut, M. Baciut, S. Bran, S. Ali, and A.S. Biris, J. Phys. Chem. C 115 (2011) 18967–18976.
[17]. H.B. Ma, W.X. Su, Z.X. Tai, D.F. Sun, X.B. Yan, B. Liu, and Q.J. Xue, Chinese Sci. Bull. 57 (2012) 3051–3058.
[18]. M.A. Rafiee, J. Rafiee, I. Srivastava, Z. Wang, H.H. Song, Z.Z. Yu, and N. Koratkar, Small 6 (2) (2010) 179–183.
[19]. D. Lahiri, S. Ghosh, and A. Agarwal, Mater. Sci. Eng. C, 32 (7) (2012) 1727–1758.
[20]. S. Park, and R.S. Ruoff, Nat. Nanotechnol. 4 (4) (2009) 217–224.
[21]. M. Kalbacova, A. Broz, J. Kong, and M. Kalbac, Carbon 48 (15) (2010) 4323–4329.
[22]. W.B. Hu, C. Peng, W.J. Luo, M. Lv, X.M. Li, D. Li, Q. Huang, C. Fan, ACS Nano 4 (7) (2010) 4317–4323.
[23]. H.Y. Liu, P.X. Xi, G.Q. Xie, Y.J. Shi, F.P. Hou, L. Huang, F. Chen, Z. Zeng, C. Shao, and J. Wang, J. Phys. Chem. C 116 (5) (2012) 3334–3341.
[24]. S. Eraković, A. Janković, Dj. Veljović, E. Palcevskis, M. Mitrić, T. Stevanović, Dj. Janaćković, and V. Mišković-Stanković, J. Phys. Chem. B 117 (6) (2013) 1633–1643.
[25]. S. Erakovic, A. Jankovic, I. Z. Matić, Z.D. Juranić, M. Vukašinović-Sekulić, T. Stevanović, and V. Mišković-Stanković, Mater. Chem. Phys. 142 (2013) 521–530.
[26]. A.R. Boccaccini, S. Keim, R. Ma, Y. Li, and I. Zhitomirsky, J. R. Soc. Interface 7 (2010) S581– S613.
[27]. I. Corni, M.P. Ryan, and A.R. Boccaccini, J. Eur. Ceram. Soc. 28 (7) (2008) 1353–1367.
[28]. A.R. Boccaccini, J. Cho, T. Subhani, C. Kaya, and F. Kaya, J. Eur. Ceram. Soc. 30 (5) (2010) 1115–1129.
[29]. C. Kaya, I. Singh, and A.R. Boccaccini, Adv. Eng. Mater. 10 (1-2) (2008) 131–138.
[30]. Y.W. Song, D.Y. Shan, and E.H. Han, Mater. Lett. 62 (17-18) (2008) 3276–3279.
[31]. M.S. Djošić, Z.M. Kačarević-Popović, B.M. Jokić, N. Bibić, M. Mitrić, S.K. Milonjić, R. Jančić-Heinemann, and J. Stojanović, Colloid Surf. A 341(1-3) (2009) 110–117.
[32]. V.B. Misković-Stanković, Electrophoretic Depo¬sition of Ceramic Coatings on Metal Surfaces. In: Stojan S. Djokić, editor. Electrodeposition and Surface Finishing: Fundamentals and Applications, Modern Aspects of Electrochemistry, vol 57, New York; Springer Science+Business Me¬dia; 2014, p. 133–216.
[33]. P. Sarkar, and P.S. Nicholson, J. Am. Ceram. Soc. 79(8) (1996) 1987–2002.
[34]. S. Eraković, Dj. Veljović, P.N. Diouf, T. Stevanović, M. Mitrić, Dj. Janaćković, I.Z. Matić, Z.D. Juranić, and V. Mišković-Stanković, Prog. Org. Coat. 75(4) (2012) 275–283.
[35]. S. Eraković, Dj. Veljović, P.N. Diouf, T. Stevanović, M. Mitrić, S. Milonjić, and V. Mišković-Stanković, Int. J. Chem. React. Eng. 7:A62 (2009).
[36]. A. Janković, S. Eraković, M. Mitrić, I.Z. Matić, Z.D. Juranić, G.C.P. Tsui, C.-Y. Tang, V. Mišković-Stanković, K.Y. Rhee, and S.J. Park, J. All. Comp. 624 (2015)148–157.
[37]. K.N. Kudin, B. Ozbas, H.C. Schniepp, R.K. Prudhomme, I.A. Aksay, and R. Car, Nano Lett. 8 (1) (2008) 36–41.
[38]. S. Erakovic, A. Jankovic, C. Ristoscu, L. Duta, N. Serban, A. Visan, I.N. Mihailescu, G.E. Stan, M. Socol, O. Iordache, I. Dumitrescu, C.R. Luculescu, Dj. Janackovic, and V. Miskovic- Stankovic, Appl. Surf. Sci. 293 (2014) 37–45.
[39]. C.-C. Wu, S.-T. Huang, T.-W. Tseng, Q.-L. Rao, and H.-C. Lin, J. Mol. Struct. 979 (2010) 72–76.
[40]. Z. Fan, J. Wang, Z. Wang, H. Ran, Y. Li, L. Niu, P. Gong, B. Liu, S. Yang, Carbon 66 (2014) 407–416.
[41]. P. Lian, X. Zhu, S. Liang, Z. Li, W. Yang, and H. Wang, Electrochim. Acta 55 (12) (2010) 3909–3914.
[42]. E.C. Victoria, and F.D. Gnanam, Trends Biomater. Artif. Organs 16(1) (2002) 12–14.
[43]. A. Roguska, M. Pisarek, M. Andrzejczuk, M. Dolata, M. Lewandowska, and M. Janik-Czachor, Mater. Sci. Eng. C 31(5) (2011) 906–914.
[44]. Z.Q. Yao, Yu. Ivanisenko, T. Diemant, A. Caron, A. Chuvilin, J.Z. Jiang, R.Z. Valiev, M. Qi, and H.-J. Fecht, Acta Biomater. 6 (7) (2010) 2816– 2825.
[45]. K.M. Watling, J.F. Parr, L. Rintoul, C.L. Brown, and L.A. Sullivan, Spectrochim. Acta A 80 (1) (2011) 106–111.
[46]. V. Mišković-Stanković, A. Janković, S. Eraković, K.Y. Rhee, VIII International Symposium Physics and Chemistry of Carbon Materials/ Nanoengineering, Almaty, The Republic of Kazakhstan, 2014, Proceedings, p. 21–23.
[47]. M. Li, Q. Liu, Z. Jia, X. Xu, Y. Shi, Y. Cheng, Y.F. Zheng, T.F. Xi, S.C. Wei, Carbon 67 (2013)185–197.
[48]. V.H. Nguyen, B.K. Kim, Y.-L. Jo, and J.-J. Shim, J. Supercrit. Fluids 72 (2012) 28–35.
[49]. A. Leyland, and A. Matthews, Wear 246 (2000) 1–11.
[50]. S. Sutha, K. Kavitha, G. Karunakaran, V. Rajendran, Mater. Sci. Eng. C, 33 (2013) 4046–4054.
[51]. M.M. Popović, B.N. Grgur, and V.B. Mišković– Stanković, Prog. Org. Coat. 52(4) (2005) 359–365.
[52]. M. Sluyters-Rehbach, Pure, Appl. Chem. 66 (9) (1994) 1831–1891.
[53]. V.D. Jović, and B.M. Jović, J. Electroanal. Chem. 541 (2003) 1–11.
[54]. M.E. Orazem, and B. Tribollet, Electrochemical impedance spectroscopy. Hoboken: New Jersey: John Wiley & Sons, Inc; 2008.
Downloads
Published
How to Cite
Issue
Section
License
You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.
Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).
Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.