Natural Clays of the Kazakhstan Deposits for Catalysts of Cracking

Authors

  • N.A. Zakarina D.V. Sokolsky Institute of Organic Catalysis and Electrochemistry 142 Kunaev St., 480100, Almaty, Kazakhstan
  • L.D. Volkova D.V. Sokolsky Institute of Organic Catalysis and Electrochemistry 142 Kunaev St., 480100, Almaty, Kazakhstan
  • O.V. Chshukina D.V. Sokolsky Institute of Organic Catalysis and Electrochemistry 142 Kunaev St., 480100, Almaty, Kazakhstan

DOI:

https://doi.org/10.18321/ectj526

Abstract

Presented paper is devoted to the construction of cracking catalysts based on H-form zeolite Y, modifying by heteropolyacids of 12 row decationzed forms of natural clays of Tagan and Narynkol deposits. Conditions of acid activation were compared for Tagan clay. Chemical composition of clays before and after activation was detected by optical emission spectral method; phase composition was detected with X-ray diffraction. It has been shown that activities of composite catalysts are related to the concentration and sequence of HPA adding. From the results the conclusion was drawn that amount of adding HPA influenced the activity and thermal stability of catalysts prepared on the base of Tagan and Narynkol clays deposits. The synthesized catalysts were studied in a laboratory microimpulse catalytic set by the model reaction of isopropylbenzene cracking at temperature 350-500 °C. The optimum compositions of zeolite containing contacts served as the base of creation of cracking catalysts for real raw (kerosene-gas-oil fraction) into quartz reactor with a fixed catalyst bed. These prepared catalysts have demonstrated enhanced thermal stability and high activity. Stronger cracking activity of catalysts prepared on the base of Narynkol clay has been shown.

References

(1). Misono V., Okuhara T. Mizuno N., Successful Design of Catalysts. (1989), V. 44, p.267.

(2). Zakarina N.A., Volkova L.D., Artyukhina G.V., Russian-Corea seminar of catalysis. Novosibirsk. (1995), Part 1, p.82.

(3). Navalihina M.D., Spizin V.I., Kolli I.D., Izw. AN SSSR. Ser. Khemy (1985), No1, p.18.

(4). Navalihina M.D., Proskurin A.M., Krylov O.V., Catalys in Industry. (2001), No1, p. 41.

(5). Rao K. Mohana, Gobetto R., Ianni Bello A., Zeckhina A., J. Catalysis. (1989), V.119, No2, p.512.

(6). Minachev Kh. M., GaraninaV.I., Navalihina M.D., Nephtekhemia. (1985), V.25, No6, p.739.

(7). Battalova Sh. B., Physicochemical principles of catalysts and adsorbents producing and application from bentonites. Alma-Ata: Science Kaz.SSR (1986), p.167

(8). Topchieva K.V., Ho Shi Thoang., Activity and physical and chemical properties of zeolites with high silica concentration and zeolit- containing catalyst: M., MGU, (1976), p.167.

(9). Zakarina N.A., Volkova L.D., Prepatent of RK on the basis of inventors application No 2000/2536 from 10.04.01.

Downloads

Published

2002-03-20

How to Cite

Zakarina, N., Volkova, L., & Chshukina, O. (2002). Natural Clays of the Kazakhstan Deposits for Catalysts of Cracking. Eurasian Chemico-Technological Journal, 4(2), 141–145. https://doi.org/10.18321/ectj526

Issue

Vol. 4 No. 2 (2002)

Section

Articles

License

Copyright (c) 2002 Eurasian Chemico-Technological Journal

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.

Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.

Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).

Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.