Calculation of Vibrational Spectra and Thermodynamic Functions of a Natural Zinc Silicate – Willemite
DOI:
https://doi.org/10.18321/ectj226Abstract
A zinc silicate is in a great demand in modern technology due to its fluorescent, optical and catalytic properties. However, its thermodynamic properties have been studied not sufficiently, and they are focused primarily in the geological and geochemical sciences. An attempt to calculate for a natural zinc silicate willemite (Zn2SiO4) its crystal structure, vibrational properties, phonon states and thermodynamic functions was made in this work. The force constants and vibrational states of the mineral have been calculated in this paper by a combination of the methods of quantum-chemical calculations (MOPAC) with semi-empirical method PM5 and the theory of crystal lattice dynamics (LADY program) with valence force field potential
model. Theoretical infrared and Raman spectra of the mineral were simulated on the base of calculated vibrational states. A good agreement between the experimental and theoretical vibrational spectra of the mineral has been achieved. After that the Brillouin zone scanning of the mineral crystal structure was made which is necessary to obtain the information about the whole phonon spectrum in the lattice. Density-of-state function was determined by summation over all the phonon states and used for determination of energetics of the crystal. The values of the basic thermodynamic functions for willemite (heat capacity, entropy and change of enthalpy) over the range of (10-298.15) K have been obtained. The standard values of these functions are: Cp(298.15) = 126 J/(mol•K) (PM5 calculation) and 122.5 J/(mol•K) (LADY calculation), Sº(298.15) = 133.4 J/(mol•K) (LADY calculation), and Hº(298.15)–Hº(0) = 21494 J/mol (PM5 calculation). The calculated heat capacity values are in satisfactory agreement with known experimental data.
References
2. Schneider, J., Boni, M., Laukamp, C., Bechstädt, T., Petzel V., Ore Geol. Rev. 33:152 (2008).
3. El Ghoul, J., Barthou, C., Saadoun, M., El Mir, L., J. Phys. Chem. Solids 71:194 (2010).
4. Takesue, M., Suino, A., Shimoyama, K., Hakuta, Y., Hayashi, H., and Smith Jr., R. L., J. Cryst. Growth 310:4185 (2008).
5. Podbršček, P., Dražić, G., Anžlovar, A., and Orel Z.C., Mater. Res. Bull. 46:2105 (2011).
6. Takesue, M., Hayashi, H., and Smith Jr., R. L., Prog. Cryst. Growth Charact. Mater. 55:98 (2009).
7. Yurieva, T.M., Minyukova, T.P., Kustova, G.N.,Plyasova, L.M., Krieger, T.A., Demeshkina, M. P., Zaikovskii,
V.I., Malakhov, V.V., and Dovlitova, L. S., Mater. Res. Innovations 5:74 (2001).
8. Kim, J.-S., Song, M.-E., Joung, M.-R., Choi, J.- H., Nahm, S., Gu, S.-I., Paik, J.-H., and Choi, B.-H., J. Eur. Ceram. Soc. 30:375 (2010).
9. Corro, G., Pal, U., and Tellez, N., Appl. Catal.,B 129:39 (2013).
10. Klaska, K.-H., Eck, J.C., and Pohl, D., Acta Crystallogr., Sect. B: Struct. Crystallogr. Cryst. Chem. 34:3324 (1978).
11. Smirnov, M.B., and Kazimirov, V.Yu. LADY: Software for lattice dynamics simulations. Communication
of the Joint Institute for Nuclear Research, Preprint JINR E14-2001-159, Dubna, Russia, 2001, 34 p.
12. Tarte P. Spectrochim. Acta 18:467 (1962).
13. Lukić, S.R., Petrović, D.M., Dramićanin, M.D., Mitrić, M., and Đačanin, L., Scr. Mater. 58:655 (2008).
14. Bisengalieva, M.R., Mel’chakova, L.V., Ogorodova, L.P., and Vigasina, M.F., Russ. J. Phys. Chem. A 84:1481 (2010).
15. Lu, Q., Wang, P., and Li, J., Mater. Res. Bull. 46:791 (2011).
16. Singh, R.G., Singh, F., Mehra, R.M., Kanjilal, D., and Agarwal, V., Solid State Commun. 151:701 (2011).
17. Suino, A., Toyama, S., Takesue, M., Hayashi, H., and Smith Jr., R.L., Mater. Chem. Phys. 137:1025 (2013).
18. Lv, Y., Zuo, R., and Yue, Z., Mater. Res. Bull. 48:2011 (2013).
19. Robie, R., and Hemingway, B. Thermodynamic properties of minerals and related substances at 298.15 K and 1 bar (105 pascals) pressure and at higher temperatures. U.S. Gov. Printing Office, Washington, 1995,
461 p.20.
20. Todd, S.S., J. Amer. Chem. Soc. 73:3277 (1951).
Downloads
Published
How to Cite
Issue
Section
License
You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.
Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).
Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.