Preparation and Studies of Electrodeposited CuSe Thin Films
DOI:
https://doi.org/10.18321/ectj598Abstract
Cathodic electrodeposition in the presence of sodium dodecyl-sulphate in aqueous solution was used to prepare CuSe thin film deposited on titanium substrates. The effect of deposition potential, concentration and deposition time were studied to determine the optimum condition for the electrodeposition process. The films were characterized by X-ray diffractrometry. Scanning electron microscopy was used to study the morphology of the deposits. The photoresponse of the films prepared was analysed using linear sweep voltammetry in the presence of sodium thiosulphate.
References
(2). G.J. Hutchings, M.T. Sananes-Schulz, S. Sajip, C.J. Kiely, A. Burrows, I.J. Ellison and J.C. Volta, Catal. Today 33:161 (1997).
(3). G.J. Hutchings, C.J. Kiely, M.T. Sananes-Schulz, A. Burrows and J.C. Volta, Catal. Today 40:273 (1998).
(4). J. Ellison, G. Hutchings, M. Sananes and J. Volta, J. Chem. Soc., Chem. Commun. 1093 (1994).
(5). Y.H. Taufiq-Yap, B.H. Sakakini and K.C. Waugh, Catal. Lett. 46:273 (1997).
(6). Y.H. Taufiq-Yap, M.H. Looi, K.C. Waugh, M.Z. Hussein, Z. Zainal and R. Samsuddin, Catal. Lett. 74:99 (2001).
(7). K.C. Waugh and Y.H. Taufiq-Yap, Catal. Today 81:215 (2003).
(8). P.A. Redhead, Trans Faraday Soc. 57:641 (1961).
(9). B.H. Sakakini, Y.H. Taufiq-Yap and K.C. Waugh, J. Catal. 189:253 (2000).
Downloads
Published
How to Cite
Issue
Section
License
You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.
Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).
Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.