Methodology of Corrosion Testing of Nuclear and Fusion Reactors Materials Using TGA/DSC and MS Complex Techniques

Authors

  • Yu.V. Ponkratov Branch Institute of Atomic Energy, NNC of RK, 10 Krasnoarmeyskaya st., Kurchatov, Kazakhstan
  • V.S. Bochkov Branch Institute of Atomic Energy, NNC of RK, 10 Krasnoarmeyskaya st., Kurchatov, Kazakhstan
  • K.K. Samarkhanov Branch Institute of Atomic Energy, NNC of RK, 10 Krasnoarmeyskaya st., Kurchatov, Kazakhstan
  • I.S. Karambayeva Branch Institute of Atomic Energy, NNC of RK, 10 Krasnoarmeyskaya st., Kurchatov, Kazakhstan
  • S.K. Askerbekov al-Farabi Kazakh National University, 71, al-Farabi ave., Almaty, Kazakhstan

DOI:

https://doi.org/10.18321/ectj787

Abstract

The behavior of structural materials of nuclear and fusion reactors during operation largely determines their safe and economical work. Structural materials of nuclear and fusion reactors are operating under conditions of interaction with various chemical active elements (gases, vapor-gas mixtures, fission products, etc.) in a wide temperature range; they are subject to high requirements in terms of their thermal and corrosion resistance. This paper presents the new methodology of complex studies on structural materials corrosion resistance of nuclear and fusion reactors with different gases and vapor-gas mixtures by thermal-gravimetric analysis (TGA), differential-scanning calorimetry (DSC) and mass spectrometry (MS) methods simultaneously.

References

(1). T.V. Kulsartov, Y.N. Gordienko, I.L. Tazhibayeva, E.A. Kenzhin, N.I. Barsukov, A.O. Sadvakasova, A.V. Kulsartova, Zh.A. Zaurbekova. J. Nucl. Mater. 442 (2013) S740– S745. Crossref DOI: https://doi.org/10.1016/j.jnucmat.2013.03.036

(2). A.O. Sadvakassova, I.L. Tazhibayeva, E.A. Kenzhin, Z.A. Zaurbekova, T.V. Kulsartov, Y.N. Gordiyenko, Y.V. Chikhray, Fusion Sci. Technol. 60 (2011) 9–15. Crossref DOI: https://doi.org/10.13182/FST11-A12398

(3). I.L. Tazhibayeva, I. Beckman, V. Shestakov, T. Kulsartov, E. Chikhray, E. Kenzhin, A. Kiykabaeva, H. Kawamura, K. Tsuchiya, J. Nucl. Mater. 417 (2011) 748–752. Crossref DOI: https://doi.org/10.1016/j.jnucmat.2010.12.133

(4). T. Kulsartov, I. Tazhibayev, Yu. Gordienko, E. Chikhray, K. Tsuchiya, H. Kawamura, A. Kulsartova, Fusion Sci. Technol. 60 (2011) 1139–1142. Crossref DOI: https://doi.org/10.13182/FST11-A12616

(5). Ye.V. Chikhray, T.V. Kulsartov, V.P. Shestakov, A.O. Mukanova, I.A. Kenzhina, S. Askerbekov, Physical Sciences and Technology 1 (2015) 4–12.

(6). M. Wagner. Thermal Analysis in Practice, 2017, p. 349. Crossref DOI: https://doi.org/10.3139/9781569906446

(7). H. Atsumi, Y. Takemura, T. Konishi, T. Tanabe, T. Shikama, J. Nucl. Mater. 438 (2013) S963– S966. Crossref DOI: https://doi.org/10.1016/j.jnucmat.2013.01.209

(8). H. Atsumi, T. Tanabe, T. Shikama. J. Nucl. Mater. 417 (2011) 633–636. Crossref DOI: https://doi.org/10.1016/j.jnucmat.2010.12.100

(9). C. Lechner, P. Baranek, H. Vach, Carbon 127 (2018) 437–448. Crossref DOI: https://doi.org/10.1016/j.carbon.2017.09.095

(10). H. Atsumi, T. Tanabe, T. Shikama, Fusion Sci. Technol. 67 (2015) 245–249. Crossref DOI: https://doi.org/10.13182/FST14-T2

(11). M.S. El-Genk, J-M. Tournier, B.W. Travis. Graphite Oxidation Simulation in HTR Accident Conditions. 3rd year and final technical report. No. UNM-ISNPS-1-2012. 2012. P. 176. DOI: https://doi.org/10.2172/1053849

(12). A.P. Rodzevich. Physico-chemical basis of metallurgical processes. Tutorial. Tomsk Polytechnic University publisher. 2010. P. 298. (in Russian).

Downloads

Published

20-02-2019

How to Cite

Ponkratov, Y., Bochkov, V., Samarkhanov, K., Karambayeva, I., & Askerbekov, S. (2019). Methodology of Corrosion Testing of Nuclear and Fusion Reactors Materials Using TGA/DSC and MS Complex Techniques. Eurasian Chemico-Technological Journal, 21(1), 35–40. https://doi.org/10.18321/ectj787

Issue

Section

Article