Effect of Modification on Electrochemical Chelation of Polyimide Films

Authors

  • Saule Kudaikulova Institute of Chemical Sciences, 106 Walikhanov Street, 480100, Almaty, Kazakhstan
  • Assima Syzdykova Institute of Chemical Sciences, 106 Walikhanov Street, 480100, Almaty, Kazakhstan
  • Rinat Iskakov Institute of Chemical Sciences, 106 Walikhanov Street, 480100, Almaty, Kazakhstan
  • Bulat Zhubanov Institute of Chemical Sciences, 106 Walikhanov Street, 480100, Almaty, Kazakhstan
  • Juldyz Akhmetova Center of Physico-Chemical Analysis, al-Farabi National University 95a Karasay Batyr st., 480012, Almaty, Kazakhstan
  • Olga Moisseyevich Center of Physico-Chemical Analysis, al-Farabi National University 95a Karasay Batyr st., 480012, Almaty, Kazakhstan
  • Andrey Kurbatov Center of Physico-Chemical Analysis, al-Farabi National University 95a Karasay Batyr st., 480012, Almaty, Kazakhstan
  • Tleuken Akhmetov Center of Physico-Chemical Analysis, al-Farabi National University 95a Karasay Batyr st., 480012, Almaty, Kazakhstan
  • Marc J.M. Abadie Laboratory of Polymer Science & Advance Organic Materials, Montpellier University 2, S.T.L., Place Eugène Bataillon, 34095 Montpellier Cedex 5, France

DOI:

https://doi.org/10.18321/ectj329

Abstract

Novel procedure of electrochemical chelation of polyimide films was developed. The kinetics of silver cation sorptions into the films during the chelation was found out. The effect of modification treatment of film surfaces on kinetics of electrochemical process was studied. The stabilization of ion-sorbed layer of films occurs in water-isopropanol solvents. Sorption of silver during electrochemical deposition is 0.75-1.5 mg per 100 µm of polyimide depending on modification solution. Thus, the most appropriate morphological modification with about 1.5 mg/100 µm take places in heterocyclic solvents. The resulting metallized polyimide films show good non-washing out adhesion of metal into gel-like structured surfacial layers of the film.

References

1. Sroog C.E. J.Polym.Sci. Macromol.Rev. 11:161 (1976).

2. Polyimides: Fundamentals and Applications. Ghosh M.K. and Mittal K.L.(eds.) Marcel Dekker, New York, 1996, p.531.

3. Matienzo L.Y., Unertl W.N. in Polyimides: Fundamentals and Applications. Ghosh M.K. and Mittal K.L.(eds.) Marcel Dekker, New York, 1996, p.629.

4. Lee K.W., Viehbeck A. in Polyimides. Fundamentals and Applications. Ghosh M.K. and Mittal K.L.(eds.) Marcel Dekker, New York, 1996, p.505.

5. Syzdykova, S. Kudaikulova, G. Boiko, B. Zhubanov. Mater. Int. confer. Chemistry, education & industry. Pavlodar Nov. 15-16 2001, p. 260.

6. M. Koton, T. Redrova, A. Krasovski. Doklady AN USSR. 265:660 (1982).

7. N. Mikhailov, V. Artemiev, N. Kuparkin, et al. J. Prikladnoy chimia. 5:1156 (1986).

8. N. Melnikova, A. Kuzmin, V. Kartashev. Plastamassy. 2:23 (1988).

9. V. Mirkin, M. Ilushenko. Potentiometric indicators as electrodes. Almaty. 1983, p. 255.

10. N. Melnikova, E. Kochneva, A. Kuzmin, V. Kartashev. J. Prikladnoy chimia. 7:1512 (1991).

11. N. Melnikova, E. Grudzinskaya, O. Kondrashina, S. Zhukova. Izvestia VUZov. Chim. & Chim. technol. 40(3): 44 (1997).

12. Syzdykova, S. Kudaikulova, G. Boiko, B. Zhubanov. Mater. Int. confer. Chemistry, education & industry. Pavlodar Nov. 15-16 2001, p. 266.

13. S. Kudaikulova, A. Syzdykova, G. Boiko, B. Zhubanov. Mater. III Int. Beremjanov’s summit Chem.& Chem.technol. Oskemen, Sept. 10-12, 2001, p. 160.

Downloads

Published

2004-03-25

How to Cite

Kudaikulova, S., Syzdykova, A., Iskakov, R., Zhubanov, B., Akhmetova, J., Moisseyevich, O., … Abadie, M. J. (2004). Effect of Modification on Electrochemical Chelation of Polyimide Films. Eurasian Chemico-Technological Journal, 6(1), 23–26. https://doi.org/10.18321/ectj329

Issue

Vol. 6 No. 1 (2004)

Section

Articles

License

You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.

Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.

Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).

Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.

Most read articles by the same author(s)