Effect of Additive of Polymetallic Ores’ Tailings on Properties of Composite Cements

Authors

  • A. Zh. Aymenov M. Auezov South-Kazakhstan State University, 5, Tauke-khan av., Shymkent, Kazakhstan
  • N. B. Sarsenbayev M. Auezov South-Kazakhstan State University, 5, Tauke-khan av., Shymkent, Kazakhstan
  • T. M. Khudyakova M. Auezov South-Kazakhstan State University, 5, Tauke-khan av., Shymkent, Kazakhstan
  • B. K. Sarsenbayev M. Auezov South-Kazakhstan State University, 5, Tauke-khan av., Shymkent, Kazakhstan
  • A. T. Batyrkhanov M. Auezov South-Kazakhstan State University, 5, Tauke-khan av., Shymkent, Kazakhstan
  • B. T. Kopzhassarov M. Auezov South-Kazakhstan State University, 5, Tauke-khan av., Shymkent, Kazakhstan

DOI:

https://doi.org/10.18321/ectj442

Abstract

The article analyzes the use of polymetallic ores’ tailings as a basis for production of composite cements and concrete, having protective properties against gamma and X-rays radiation, as well as high strength and lifetime. The main practically significant result is: the development of scientific and technological production bases of new high-tech type of multicomponent hydraulic binders for concretes – composite cements; the identification of new hydration products in composite cements with addition of polymetallic ores’ tailings; the development of optimal compositions of composite cements for concretes. It is established that the composite cements, that developed by us on the basis of polymetallic ores’ tailings, meet modern requirements i.e. its improve the construction-technical properties of material, have positive effect to the environment situation and allow to reduce the production cost of the final product. Their technology is low metal-intensive and power-consuming. Studies of physical-chemical processes of composite cements structure formation with addition of polymetallic ores’ tailings have been conducted using methods such as chemical, X-ray phase, differential-thermal and electronmicroscopic analysis methods.

References

[1]. V.M. Ufimtsev, F.L. Kapustin, V.A. Pyachev, Cement i ego primenenie [Cement and its application] 6 (2009) 86‒90 (in Russian).

[2]. N.N. Mazharin, V.K. Klassen, Cement i ego primenenie [Cement and its use] 1 (2009) 55‒59 (in Russian).

[3]. V.M. Ufimtsev, F.L. Kapustin, V.A. Pyachev, Tehnologija betonov [Technology of concretes] 2 (2009) 16‒18 (in Russian).

[4]. V.A. Ileychev, N.I. Karpenko, V.N. Yamkovsky, Stroitel'nye materialy [Building materials] 4 (2011) 36‒42 (in Russian).

[5]. V.I. Shubin, B.E. Yudovich, A.M. Dmitriyev and S.A. Zubehin, Cement i ego primenenie [Cement and its Applications] 6 (2001) 23‒26 (in Russian).

[6]. K. Dombrowsky. Untersuchungtnzu AlkaliCarbonat – bzw. Flrali-Dolomit – Reaction an Gesteinsmaterialien. ZKG INTERNATIONAL, v.59, № 9, 2006, pp.79-87.

[7]. M.Y. Bikbau, V.N. Mochalov, Chen Lun, Cement i ego primenenie [Cement and its application] 3 (2008) 69‒71 (in Russian).

[8]. U.M. Butt, M.M. Sychev, V.V. Timashev. Chemical technology of binders // Textbook Higher school. –
1980. – p. 472 (in Russian).

[9]. T.M. Khudyakova, V.F. Verner, B.T. Taimasov, Ways of resources saving in cement production // Collected works of the VIIIth International meeting of heads of laboratories of cement plants. – 2013. – pp. 34–38
(in Russian).

[10]. G.K. Uteniyazova, A.M. Iskendirov, G.A. Atakuzieyev. About impact of calcium carbonates on cement properties // Journal ASR of the Republic of Uzbekistan. – 2006. – pp. 60-62 (in Russian).

[11]. G.K. Uteniyazova, A.M. Iskendirov, G.A. Atakuzieyev. Theory and practice of composite building materials // Republican scientifictechnical conference T.TACI. – 2008. – pp. 20-22 (in Russian).

Downloads

Published

2016-05-25

How to Cite

Aymenov, A. Z., Sarsenbayev, N. B., Khudyakova, T. M., Sarsenbayev, B. K., Batyrkhanov, A. T., & Kopzhassarov, B. T. (2016). Effect of Additive of Polymetallic Ores’ Tailings on Properties of Composite Cements. Eurasian Chemico-Technological Journal, 18(2), 153–160. https://doi.org/10.18321/ectj442

Issue

Section

Articles

Most read articles by the same author(s)