Phase Composition and Structure-Formation of the Low-Clinkered Floured Cements

Authors

  • N. B. Sarsenbayev M. Auezov South-Kazakhstan State University, Tauke-khan avenue-5, Shymkent, Kazakhstan
  • B. K. Sarsenbayev M. Auezov South-Kazakhstan State University, Tauke-khan avenue-5, Shymkent, Kazakhstan
  • T. S. Aubakirov M. Auezov South-Kazakhstan State University, Tauke-khan avenue-5, Shymkent, Kazakhstan
  • J. T. Aimenov M. Auezov South-Kazakhstan State University, Tauke-khan avenue-5, Shymkent, Kazakhstan
  • K. S. Abdiramanova M. Auezov South-Kazakhstan State University, Tauke-khan avenue-5, Shymkent, Kazakhstan

DOI:

https://doi.org/10.18321/ectj2

Abstract

We have carried out studies on the production of low-clinkered floured cements (LCFC) on the basis of natural and technogenic waste. The research on optimizing the compositions, strength, durability and performance properties of low-clinkered floured cements (LCFC) was carried out. Therefore, we studied the new products in the process of hydration of mechanically activated multi-component cements in the presence of technogenic wastes of the industry (waste of limestone crushing at opencast mines, metallurgical and phosphoric slag) and surface-active reagents (SAR) (superplasticizer S-3); as well as the development of compositions of high-strength and technological sorts of cement concretes. Thus, the low-clinkered floured cements developed by us based on industrial technogenic waste that meet the modern requirements, i.e. they improve physical-mechanical characteristics of the material and positively influence the ecological situation and allow decreasing the cost of final product. The physico-chemical research of the processes of hydration of low-clinkered floured cements with additive of superplasticizer S-3 were carried out by modern methods using X-ray diffract-meter D8ADVANCE (Bruker company) with Cu-radiation and synchronous thermo-analyzer STA 409 PC Luxx (Netzsch, Germany) at exposure mode of 10 Вє/min in the platinum crucibles in the air conditions.

References

[1]. V.M. Ufimtsev, F.L. Kapustin, V.A. Pjachev. Problems of use of technogenic raw materials in cement manufacture. Cement i ego primenenie [Cement and its using] (in Russian), 6 (2009) 86–90.

[2]. N.N. Mazharin, V.K. Klassen. Production efficiency of two-clinker mixed cements. Cement i ego primenenie [Cement and its using] (in Russian), 1 (2009) 55–59.

[3]. G.N. Pshenichny, About the mechanism of Portland cement hardening. Tehnologija betonov [Technology of concrete] (in Russian), 1 (2009) 28–36.

[4]. N.A. Suzev, T.M. Hudjakova, S.A. Nekipelov, Some properties of concrete on carbonate Portland cement. Tehnologija betonov [Technology of concrete] (in Russian), 9-10 (2009) 20–23.

[5]. V.M. Ufimtsev, F.L. Kapustin, V.A Pjachev. Side mineral products of thermal power system in manufacture of binding materials: new opportunities. Tehnologija betonov [Technology of concrete] (in Russian), 2 (2009) 16–18.

[6]. V.A. Ilechev, N.I. Karpenko, V.N. Jamkovsky.About development the building materials production on the basis of industrial secondary products. Stroitel’nye materialy [Building materials] (in Russian) 4 (2011) 36–42.

[7]. V.N. Zhovtaja, I.G. Luginina, Condition of raw material resources and waste using, Materials of 8th All-Union scientific-technical meeting on chemistry and technology of cement, М.: INJeK (in Russian) 1991, p.298–301.

[8]. S.P. Shkarupa, Cement. Logistics problems.Stroitel’naja gazeta [Building newspaper] (in Russian) 5 (2008)
pp. 1.02.

Downloads

Published

2014-11-10

How to Cite

Sarsenbayev, N. B., Sarsenbayev, B. K., Aubakirov, T. S., Aimenov, J. T., & Abdiramanova, K. S. (2014). Phase Composition and Structure-Formation of the Low-Clinkered Floured Cements. Eurasian Chemico-Technological Journal, 16(4), 333–338. https://doi.org/10.18321/ectj2

Issue

Vol. 16 No. 4 (2014)

Section

Articles

License

You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.

Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.

Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).

Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.

Most read articles by the same author(s)