Electrodeposition and Electrooxidation of Bimetallic Systems Co–Ni and Cu–Ni

Authors

  • N. V. Ivanova Kemerovo State University, Krasnaya st., 6, 650043 Kemerovo, Russia
  • A. A. Kubylinskaya Kemerovo State University, Krasnaya st., 6, 650043 Kemerovo, Russia 2Institute of Coal Chemistry and Material Science SB RAS, pr. Sovetskiy 18, 650000 Kemerovo, Russia
  • Yu. A. Zakharov Kemerovo State University, Krasnaya st., 6, 650043 Kemerovo, Russia Institute of Coal Chemistry and Material Science SB RAS, pr. Sovetskiy 18, 650000 Kemerovo, Russia

DOI:

https://doi.org/10.18321/ectj242

Keywords:

electrodeposition, anodic oxidation, copper, nickel, cobalt, binary systems, solid solutions, nanosized materials

Abstract

By means voltammetry method the characteristics of the electrodeposition and anodic oxidation processes of Cu, Ni, Co and Cu–Ni, Co–Ni were investigated in ammoniacal buffer supporting electrolyte using graphite electrode. The quantity, maximum currents and potentials of anodic peaks on the voltammetric curves in the case of binary system are defined by the ratio of metal ions concentration and electrodeposition procedure. The changes in the peaks parameters were attributed to the formation of bimetallic solid solutions with various contents of the components. It was shown that the result of coelectrodeposition of two metals on an inert substrate is determined not only the nature of the components of binary systems Co–Ni and Cu–Ni, but also features of the phase composition of bimetal in nano-state.

References

[1]. N. Rajasekaran, S. Mohan, Corros. Sci. 51 (2009) 2139–2143.

[2]. Singh Surendra, Basu Saibal, S.K. Ghosh, Appl. Surf. Sci. 255 (2009) 5910–5916.

[3]. E. Gomez, S. Pane, E. Valles, Electrochim. Acta 51 (2005) 146–153.

[4]. R.P. Silva, S. Eugenio, T.M. Silva, M.J. Carmezim, M.F. Montemor J. Phys. Chem. C 116 (2012) 22425−22431.

[5]. M. Duch, J. Esteve, E. Gómez, R. Pérez-Castillejos, E.J. Vallés, Electrochem. Soc. 149 (2002) 201–208.

[6]. N.A. Kolpakova, N.V. Borisova, V.A. Nevostruev, J. Anal. Chem. 56 (8) (2001) 744–747.

[7]. V.D. Jovic, B.M. Jovic, M.G. Pavlovic, Electrochim. Acta 51 (2006) 5468–5477.

[8]. V.D. Jovic, B.M. Jovic, V. Maksimovic, M.G. Pavlovic, Electrochim. Acta 52 (2007) 4254– 4263.

[9]. A.N. Correia, S.A.S. Machado, J. Appl. Electrochem. 33 (2003) 367–372.

[10]. R. Orinakova, A. Turonova, D. Kladekova, M. Galova, R. Smith, J. Appl. Electrochem. 36 (2006) 957–972.

[11]. Yu.D. Gamburg, Electrokhimitcheskaya kristallisaziya metallov i splavov [Electrochemical crystallization of metals and alloys] –M.: Yanus K, 1997, 384 pp.

[12]. Fact Sage Steel Alloy Phase Diagrams: URL: http//www.crct.Polymt.ca/fact/documentation/FSstel/ FSstel_Figs.html.

[13]. M. Khansen, K. Anderko. Struktury dvoynykh splavov. [The structures of binary alloys] M.:Metallurgizdat, 1962, V. 1, p. 514.

[14]. Yu.A. Zaharov, V.M. Pugachev, A.N. Popova, Mater. Lett. 74 (2012)173–175.

[15]. V.M. Pugachev, V.G. Dodonov, Yu.A. Zakharov, R.P. Kolmykov, O.V. Vasil’yeva, Yu.V. Shipkova, J. Adv. Mater. 11 (2011) 156–163.

[16]. Yu.A. Zakharov, R.P. Kolmykov, V.M. Pugachev, S.Yu. Lyrshchikov, Bulletin of Kemerovo State University 3 (2014) 194–200.

[17]. Yu.A. Zakharov, V.M. Pugachev, O.V. Vasil’yeva, Yu.V. Karpushkina, I.P. Prosvirin, S.Yu. Lyrshchikov, Bulletin of Kemerovo State University 3/3 (2014) 201–209.

[18]. N.V. Ivanova, V.M. Pugachev, N.A. Kolpakova, V.A. Nevostruev, J. Solid State Electrochem. 6 (8) (2002) 540–544.

[19]. A.A. Yeliseyev, A.V. Lukashin, Funktsionalnye nanomaterialy [Functional nanomaterials] – M.:FIZMALIT, 2010,
р. 113–116.

Downloads

Published

2015-07-20

How to Cite

Ivanova, N. V., Kubylinskaya, A. A., & Zakharov, Y. A. (2015). Electrodeposition and Electrooxidation of Bimetallic Systems Co–Ni and Cu–Ni. Eurasian Chemico-Technological Journal, 17(3), 181–186. https://doi.org/10.18321/ectj242

Issue

Vol. 17 No. 3 (2015)

Section

Articles

License

You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.

Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.

Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).

Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.

Most read articles by the same author(s)