AES Studies of Heteroepitaxial SiC Films Deposited on Si and on Sapphire Substrates by MOCVD
DOI:
https://doi.org/10.18321/ectj230Abstract
Auger electron spectroscopy (AES) has been used to investigate the chemical composition of the heteroepitaxial silicon carbide films grown on Si (100) and sapphire (0001) substrates at 900 °C by the MOCVD technique using DEMS precursor. Auger spectra were obtained from the surface and as a function of depth of 2 micron thick SiC films. AES measurements were performed under very high vacuum 10-9 Torr conditions. Surface cleaning and depth profile studies were carried out by using Ar+ ion beam sputtering. Auger spectra of the surface indicate Si LVV, C KLL and O KLL peaks. The Si LVV signals on the ‘as prepared’ surfaces for both substrates indicated that the silicon was in the oxide state, which was removed after 15 min Ar+ ion cleaning. Depth profile studies showed, that after 20 min of ion cleaning the SiC films possess near stoichiometric composition. Moreover, the C KLL signal on the ion cleaned films showed the carbon in the carbide state. X-ray diffraction analysis of the SiC films on the sapphire (0001) and Si(100) substrates has shown a high intensity single peaks at 35.7º, which indicates the presence of SiC at orientation (111).
References
2. Masri P., Silicon carbide and silicon carbidebased structures,the physics of epitaxy, Surface Science Reports 48 (2002), pp. 1–51.
3. J. A. Cooper, Jr., Silicon Carbide, edited by W. J. Choyke H. Matsunami, and G. Pensl (Akademie, Berlin, 1997), Vol. II, p. 305.
4. Matus L.G., Institute of Physics Conference Series No 137, 1993, p. 185–188.
5. Nianjun Yang, Hao Zhuang, Ren Hoffmann Chem. «Electrochemistry of Nanocrystalline 3C Silicon Carbide Films» Eur. J. (2012), 18, 6514 – 6519.
6. L. Muehihoff, W.J. Choyke, M.J. Bozack, and John T. Yates Jr. “Comparative electron spectroscopic
studies of surface segregation on SiC (0001), J. Appl. Phys., Vol. 60. No. 8, pp. 2842-2853, 1986.
7. Chan, King-lung “A study of geometrical properties of SiC and GaN surfaces by auger electron spectroscopy”, Thesis work, The University of Hong Kong, 2002, URL http://hdl.handle. net/10722/39037.
8. Y.M. Lei, Y.H. Yu, L.L. Cheng, C.X. Ren, S.C. Zou, “Auger electron spectroscopy study of SiC thin films deposited on silicon”, Vacuum 58, (2000), pp. 602-608.
9. J. Pezoldt, B. Stottko, G. Kupris, G. Ecke “Sputtering effects in hexagonal silicon carbide” Materials Science and Engineering: B, Volume 29, Issues 1–3, January 1995, pp 94–98.
10. R. Beisenov, R. Ebrahim, Z. A. Mansurov, S. Zh. Tokmoldin, B. Z. Mansurov, and A. Ignatiev “Growth of 3C-SiC Films on Si (111) and Sapphire (0001) Substrates by MOCVD” Eurasian chemico-technological journal, Volume 15, No. 1, pp 25-30, 2013.
11. A.I. Andreev, M.M. Anikin, A.L. Sirkin, V.E. Chelnokov “Silicon carbide surface treatment technique under the high vacuum PHYSICS AND TECHNICS OF SEMICONDUCTORS Vol. 28, N 6 pp 998-1002, 1994.
12. Davis, L. E., N. C MacDonald, et al. (1976). “Handbook of Auger Electron Spectroscopy (2nd edition).” Physical Electronics Industries.
13. Kazuhisa Miyoshi, Donald H. Buckley “Changes in surface chemistry of silicon carbide (0001) surface with temperature and their effect on friction” NASA Technical Paper 1756, 1980.
Downloads
Published
How to Cite
Issue
Section
License
You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.
Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).
Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.