Mechanochemical Synthesis of Composite Magnetic Materials on the Basis of Quartz-Containing Systems

Authors

  • N. N. Mofa Institute of Combustion Problems, 050012, Almaty, 172, Bogenbay batyra Kazakhstan
  • Z. A. Mansurov Institute of Combustion Problems, 050012, Almaty, 172, Bogenbay batyra Kazakhstan

DOI:

https://doi.org/10.18321/ectj27

Abstract

Mechanochemical treatment of quartz and its mixtures with ash-slag and iron oxides in the presence of various modifying organic additives was carried out. Quartz and mixtures based on it exhibit ferromagnetic properties and are distinguished by good sorption ability toward organic substances. Crystalline silica assumes the role of the matrix during development of structure and functional properties of the magnetic adsorbent. It was found, that the polymer film, which is used to cover the quartz particles, includes regions with embedded iron nanoparticles as well as other regions enriched with active carbon. The synthesized sorbents were used to collect petroleum spill over water; high water purification degree (up to 98%) was achieved.

References

1. Nelson-Smith A. Sea petroleum pollution. Gidrometeoizdat, Leningrad. 1973.

2. Heinike G. Tribochemistry. Akademie-Verlag. Berlin 1984. 584 p.

3. Baramboim N. K. Mechanochemistry of high molecular compounds . M.: Chemistry, 1978, 384 p.

4. Chubar .V., Ovcharenko F.D., Himchenko U.I., Vysotskaya V.I. Carbon sorbents and their indus trial application. Nauka, Moscow, 1983, p. 92-99.

5. Tarasevich U.I., Ovcharenko F.K., 1983. ”Application of natural sorbents for puri cation of petroleum products and water”, USSR sorbents conference, Moscow, p.173-179.

6. Chervyakova O.V., Mofa N.N., Ketegenov T.A., Stahov O.V. Vestnik Kaz. NU. Chem. Series. 20: 145 (2000).

7. Avvakumov E.G. Mekhanicheskiye metody aktivatsii khimicheskikh protsessov, Nauka, Novosibirsk (1986).

8. Mofa N.N., Ketegenov T.A., Shabanova T.A., Mansurov Z.A. Mechanochemical synthesis of nanocomposition systems: quartz nucleus, carbon-containing coating / III International Conference “Fundamental Bases of
Mechanochemical Technologies”, May 27 -30, 2009 Novosibirsk, Russia.

9. Mofa N.N., Shabanova T.A. Modeling of the process of mechanochemical synthesis of quartz and carbon –containing hybrid nanocomposition systems / The International carbon Conference, Carbon 2006, Aberdeen,
Scotland 16th-21st July – CD.

10. Mofa N.N., Shabanova T.A., Mansurov Z.A. Nanocomposition quartz containing materials / Structural chemistry of partially ordered systems, nanoparticles and nanocomposites. June 27-29 2006, Saint-Petersburg, Russia - 86p.

11. Mofa N.N. Chervyakova O.V., Ketegenov T.A., Mansurov Z.A. Mechanochemical synthesis of magnetic quartz containing adsorbents modified by carbon compounds // Novosti nauki Kazakhstana. Scien.-tech. coll. Research Institutes of al-Farabi KazNU. Issue 2 (81). Almaty, 2004. - P.59-65.

12. Mofa N.N., Ketegenov T.A., Ryabikin Yu.A., Chervyakova O.V., Ksandopulo G.I. // Magnetism of iron containing particles in a quartz matrix after mechanochemical treatment. Inorganic materials, 2002, V.38, №2, P. 1-6.

13. Mofa N., Mansurov Z., Xanthopoulou. G. Composite materials on the basis of silicamodified systems with high sorption activity for water surface cleaning // Euro-Asian Journal of Sustainable Energy Development Policy 2010. - V 2, №1. - P. 39–47.

14. Soh D., Mofa N., Ksandopulo G., Lan B., Ktegenov T. Reclaiming property of magnetic adsorbent for oil spell recovery and pollution control. / Proceeding of the KIEEME Annual Autumn Conference, 2001. v. 14, issue 1, p. 296–299.

Downloads

Published

2010-01-22

How to Cite

Mofa, N. N., & Mansurov, Z. A. (2010). Mechanochemical Synthesis of Composite Magnetic Materials on the Basis of Quartz-Containing Systems. Eurasian Chemico-Technological Journal, 12(1), 55–62. https://doi.org/10.18321/ectj27

Issue

Vol. 12 No. 1 (2010)

Section

Articles

License

You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.

Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.

Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).

Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.