Structural Study and Upgrading of Kazakhstan Oil Sands

Authors

  • Ye. Tileuberdi The Institute of Combustion Problems, Bogenbay str.172, 050012 Almaty, Kazakhstan
  • Z. A. Mansurov The Institute of Combustion Problems, Bogenbay str.172, 050012 Almaty, Kazakhstan
  • Ye. K. Ongarbayev Al Farabi Kazakh National University, al-Farabi av.71, 050040 Almaty, Kazakhstan
  • B. K. Tuleutaev The Institute of Combustion Problems, Bogenbay str.172, 050012 Almaty, Kazakhstan

DOI:

https://doi.org/10.18321/ectj208

Abstract

In the paper separation methods of organic part from oil sands were investigated at experimentally. For the determination of organic part (liquid fraction) of oil sands the extraction methods was used in Soxhlet apparatus by solvent. Thermal processing was carried out with a monotonic heating of oil sands from room temperature to 500 ºC. As showing results, organic part of Beke and Munayli-Mola oil sands studied by extraction method were 12.0 wt.% and 16 wt.%. Thermal processing results showed, that the organic part of Beke and Munayli-Mola oil sands were 9.6 wt.% and 13.5 wt.%. Physical and chemical characteristics of liquid fraction are established by standard methods.

References

[1]. Ye. Ongarbaev, E.O. Doszhanov, Z.A. Mansurov Processing heavy oil, oil residue and waste products. – Almaty: Kazakh University, 2011. – Р. 254 (in Russian).

[2]. JAMES G. SPEIGHT. Handbook of Petroleum Product Analysis.- John Wiley & Sons, Inc., Hoboken, – New Jersey, 2002. – P. 454.

[3]. FAQ - U.S. Energy Information Administration (EIA). http://www.eia.gov.

[4]. Hussein Alboudwarej et al. highlighting heavy oil. https://www.slb.com

[5]. Wang Qing, Jia Chunxia, Jiang Qianqian, Wang Yin, Deyin Wu., Fuel Processing Technology 99 (2012) 110–114.

[6]. Ye. Ongarbayev, A. Golovko, E. Krivtsov, E. Tileuberdi, Ye. Imanbayev, B. Tuleutayev, Z. Mansurov, STUDIA UBB CHEMIA, 59 (2014) (LIX. 4) 57–64.

[7]. Oil Sands in Kazakhstan. http://www.inogenet.com

[8]. N.K. Nadirov. Highly viscous oil and natural bitumen: in 5 t. – Almaty: Nauka, 2001. – T.5.–P. 337.

[9]. M. Parviz, Rahimi and Thomas Gentzis. The chemistry of bitumen and heavy oil processing. National Centre for Upgrading Technology,Oil Patch Drive, Suite A202, Devon. – Alberta: Canada T9G 1A8, 2008. – P. 149-186.

[10]. Andy Hong P.K., Zhixiong Cha, Xinyue Zhao, Chia-Jung Cheng, Willem Duyvesteyn, Fuel Process. Technol. 116 (2013) 460–467.

[11]. S. Wik, B.D. Spark, S. Ng, Y. Yu, Z. Li, K.H. Chung, Fuel 87 (2008) 1394–1412.

[12]. O.V. Abramov, V.O. Abramov, S.K. Myasnikov, M.S. Mullakaev, Extraction of bitumen, crude oil and its products from tar sand and contaminated sandy soil under effect of ultrasound // Ultrasonics Sonochemistry 16 (2009) 408–416.

[13]. Yue Ma, Shuyuan Li, Fuel Process. Technol. 100 (2012) 11–15.

[14]. Ye. Tileuberdi, Ye. Ongarbaev, B. Tuleutaev, Z. Mansurov, F. Behrendt, Applied Mechanics and Materials 467 (2014) 8–11.

[15]. Rada de Malherbe. Synthetic Crude from oil sands. – VDI Verglag, Dusseldorf, 1983. P. 102.

[16]. In Situ Methods used in the Oil Sands. www.ramp-alberta.org.

[17]. The Strategic Plan of Development of Kazakhstan till 2020. http://www.minplan.kz.

[18]. Banerjee, Dwijen K. Oil sands, heavy oil and bitumen. – Tulsa, USA: RenWell, 2012. – P. 185.

Downloads

Published

2015-04-10

How to Cite

Tileuberdi, Y., Mansurov, Z. A., Ongarbayev, Y. K., & Tuleutaev, B. K. (2015). Structural Study and Upgrading of Kazakhstan Oil Sands. Eurasian Chemico-Technological Journal, 17(2), 173–179. https://doi.org/10.18321/ectj208

Issue

Vol. 17 No. 2 (2015)

Section

Articles

License

You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.

Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.

Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).

Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.

Most read articles by the same author(s)

<< < 1 2 3 4 5 6 > >>