Moist Corrosion and Surface Protection of YBCO Superconductors
DOI:
https://doi.org/10.18321/ectj296Abstract
The critical currents of sintered YBa2Cu3O6.5+δ were measured as the variables with the corrosive time in
the humid air. The corrosive process was studied by means of the current changes. Ag coating on the textured YBCO and polytetrafluoroethylene (PTFE) coating on the sintered YBCO were prepared. The critical
current densities of different YBCO samples with and without coatings were compared. Both Ag coating
and PTFE coating can well protect YBCO from moisture and CO2.
References
(2). W. K. Wu, J. R. Ashburn et al., Phys. Rev. Lett., 58, 1987, pp. 908.
(3). A. Makino, Progress in Energy and Combustion Science, Vol. 27, 2001, p. 1.
(4). Patent RK N2001/0320.1., Soh D., Korobova N., Mansurov Z., Isaykina O., Baydeldinova A.
(5). Soh D., Korobova N., Isaikina O., Mansurov Z., Fan Zhanguo. Proc. of Physics and Chemistry of Carbon Materials, Almaty, 10-12 Oct., 2000, Kazakhstan, pp.26.
(6). Y.S. Sung, E.E. Hellstrom, J. Am. Ceram. Soc., Vol. 78, N8, 1995, pp. 2003.
(7). Matsuda Sh-P., “Chemistry and processing of high temperature superconductor”, in: Z.A. Munir, J.B. Holt (Eds.), Combustion and Plasma Synthesis of High-Temperature Materials, VCH Publ., Weinheim, New York, 1990, pp. 445-463.
(8). Soh D., Korobova N., Isaikina O., Kim A., Baydeldinova A., Ksandopoulo G., Mansurov Z. Proc., Spring Conf. of KIEEME, May 2001, pp. 81-84.
(9). H. Zhou, Y.Wang and Z. Qiu, Proceedings of National Superconductivity Conference, Vol.2, Bao Ji, 1988, P. R. China, p.82.
Downloads
Published
How to Cite
Issue
Section
License
You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.
Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).
Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.