Mechanochemical Synthesis of Nanocrystalline Hydroxyapatite Coating

Authors

  • A. E. Hannora Faculty of Petroleum and Mining Engineering, Suez Canal University, 43721, Suez, Egypt
  • A. S. Mukasyan Department of Chemical and Biomolecular Engineering, and Center for Molecularly Engineered Materials University of Notre Dame, 46556, IN, Notre Dame, USA
  • Z. A. Mansurov Institute of Combustion problems, 050012, Almaty, Kazakhstan

DOI:

https://doi.org/10.18321/ectj30

Abstract

A novel approach for depositing of hydroxyapatite (HA) films on titanium substrates by using high energy ball milling (HEBM) has been developed. It was demonstrated that a heat treatment of the mechanically coated HA at 800 °C for one hour leads to partial transformation of HA phase to -TCP. It appears that the grain boundary and interface defects formed during MCS reduce this characteristic transformation temperature. Also, it was shown that Ti incorporation into the HA structure causes the lattice shrinkage and reduction of its grain size as compared to pure HA, but also promote the phase transformation of HA to TCP at high temperature. It is important that doping HA by silicon, while also significantly decrease crystallinity of deposited HA layer, results in hindering of the phase transformation process. The Si-doped HA does not show phase transition or decomposition after heat treatment even at 900 °C. The samples were investigated by X-ray diffraction, scanning electron microscope, Energy dispersive spectroscopy, Atomic force microscopy, Transmission electron microscopy, inductively coupled plasma (ICP) optical emission spectrometer, Vickers microhardness, Electron paramagnetic resonance.

References

1. Johnson S., Haluska M., Narayan R.J., Snyder R.L., Materials Science and Engineering C, 26:1312(2006).

2. Albayrak O., El-Atwani O., Altintas S., Surface & Coatings Technology, 202,11:2482(2008).

3. Khor K.A., Yip C.S., Cheang P., Journal of Thermal Spray Technology, 6(I):109(1997).

4. Wang C.K., Chern Lin J.H., Ju C.P., Ong H.C., Chang R.P.H., Biomaterials, 18:1331(1997).

5. Xiao Y., Li D., Fan H., Li X., Gu Z., Zhang X., Materials Letters, 61:59 (2007).

6. Shih W.J., Chen Y.F., Wang M.C., Hon M.H., Journal of Crystal Growth , 270:211(2004).

7. Hannora A., Mamaeva A., Mansurov Z., Surface Review and Letters, 16,5:781(2009).

8. Hannora A., A. Mamaeva, N. Mofa, S. Aknazarov, Z. Mansurov, Eurasian ChemicoTechnological Journal, 11,
1:37(2009).

9. Shih W.J., Wang J.W., Wang M.C., Hon M.H., Materials Science and Engineering C, 26:1434(2006).

10. SuryanarayanaC. Mechanical alloying and milling. Progress in Materials Science, 46 (2001), 1-184.

11. El-Eskandarany M., Aoki K., Itoh H., Suzuki K.., Journal of the Less Common Metals, 169:235(1991).

12. Krupa D., Baszkiewicz J., Kozubowski A., Lewandowska-Szumie M., Barcz A., Sobczak W., Bilinski A. and Rajchel A., Bio-Medical Materials and Engineering, 14:525 (2004).

13. Daz-Estrada J. R., Camps E., EscobarAlarcon L. Ascencio J. A., J. Mater. Sci., 42:1360(2007).

14. White T., Ferraris C., Kim J., Madhavi S., Reviews in Mineralogy & Geochemistry, 57:307(2005).

15. Ramesha S., Tan C.Y., Sopyan I., Hamdi M., Teng W.D., Science and Technology of Advanced Materials, 8:124(2007).

16. Mayer I., Cuisinier G., Gdalya S., PopovI., Journal of Inorganic Biochemistry, 102:311 (2008).

17. Ribeiroa C., Gibsond I., Barbosa M. The uptake of titanium ions by hydroxyapatite particles-structural changes and possible mechanisms. Biomaterials, 27 (2006), 1749– 1761.

18. Zhang D.L., Progress in Materials Science, 49:537(2004).

19. Mahe M., Heintz J., Rodel J., Reynders P., Journal of the European Ceramic Society, 28:2003 (2008).

20. Huang J., Best S.M., Bonfield W., Buckland T., Acta Biomaterialia (2009), In Press.

21. ErgunC., Journal of the European Ceramic Society, 28:2137(2008).

22. Xiao X.F., Liu R.F., Zheng Y.Z., Materials Letters, 59:1660(2005).

23. Ergun C., Doremus R.. Turkish J. Eng. Env. Sci., 27:423(2003).

24. Lopez-A lvarez M., Solla E. L., Gonzalez P., Serra J., Leon B., Marques A. P., Reis R. L., J Mater Sci: Mater Med, 20:1131(2009).

25. Zou S., Huang J., Best S., Bonfield W., Journal of Materials Science: Materials in Medicine, 16:1143(2005).

26. Sprio S., Tampieri A., Landi E., Sandri M., Martorana S., Celotti G., Logroscino G., Materials Science and Engineering C, 28:179(2008).

27. Chappell H.F., BristoweP.D., J Mater Sci: Mater Med, 18:829(2007).

Downloads

Published

2010-04-12

How to Cite

Hannora, A. E., Mukasyan, A. S., & Mansurov, Z. A. (2010). Mechanochemical Synthesis of Nanocrystalline Hydroxyapatite Coating. Eurasian Chemico-Technological Journal, 12(2), 79–95. https://doi.org/10.18321/ectj30

Issue

Section

Articles

Most read articles by the same author(s)

<< < 1 2 3 4 5 6 > >>