Study of Operating Characteristics of Pyrotechnic Reserve Power Source Based on Magnesium and Zinс
DOI:
https://doi.org/10.18321/ectj475Keywords:
pyrotechnic reserve power source, PRPS, pyrotechnic material, cathode-anode cellAbstract
This paper presents the results of studies of operating parameters of pyrotechnic reserve power source (PRPS). This battery was activated by the pyrotechnic compositions contained in the electrodes. Once the ignition impulse worked, the pyrotechnic compositions took fire immediately and melted the electrolyte. Then the rest pyrotechnic compositions served as anode and cathode. The battery began to discharge. The following characteristics of PRPS were evaluated during the study: release time to operating regime of the electric current, the duration of the PRPS work and initiation temperature of PRPS. A detailed evaluation of the Mg/LiF/PbF2 electrochemical system and Zn/LiF/PbF2 one is undertaken. Test results show that the electric current value using powder of zinc and granular zinc in these experiments was 0.179 A and 0.1 A, respectively, and the operating time at these values of elecrtic current was 40 and 151 sec, respectively.
References
[2]. F.I. Kukoz, Teplovye istochniki toka / F.I. Kukoz, F.F. Trush, V.I. Kondratenkov. – Rostovn/D: Izd–vo Rostovskogo un–ta, 1989. P.208 (in Russian).
[3]. A.A. Potanin, Tverdotelny khimichesky istochnik toka na osnove ionnogo provodnika tipatriftorida lantana. Ros. Khim. Zh. (Zh. Ros. khim. Ob-va im D. I. Mendeleyeva), 2001, t. XLV, № 5–6. (in Russian)
[4]. D.B. Demyanenko, Novye sistemy i ustroystva piroavtomatiki / D.B. Demyanenko, A.S. Dudyrev, O.V. Starostin // Abstracts of conference «Vysshaya shkola Rossii i konversiya» (22–26 noyabrya). – M.: GK po vysshemu obrazovaniyu, 1993. – P. 251–253 (in Russian).
[5]. D.B. Demyanenko, Pirotekhnicheskiye generatory elektricheskogo toka / D.B. Demyanenko, A.S. Dudyrev // Proceedings of II Russian conference «Sovremennye problemy pirotekhniki». (27–29 noyabrya) 2002. – Sergiyev Posad: MID «Ves Sergiyev Posad», 2003. – P. 87–89 (in Russian).
[6]. D.B. Demyanenko, Istochniki elektricheskogo toka s elektrodami–pirotekhnicheskimi zaryadami /D.B. Demyanenko, A.S. Dudyrev // Proceedings of Russian scientific–technical conference «Sovremennye problemy tekhnicheskoy khimii». – Kazan: Izd–vo Kazan, tekhnol. un–ta, 2003. – P. 130–142 (in Russian).
[7]. V.A. Aleshkevich, Elektromagnetizm. – M.: FIZMATLIT, 2014. – P.404 (in Russian).
[8]. B.M. Dabynov, D.U. Bodykov, G.R. Nysan–bayeva, D.O. Aktayev, B.T. Lesbayev, R.G. Abdulkarimova, Ye.T. Aliyev, Z.A. Mansurov, Rezervnogo istochnika toka na osnove pirotekhnicheskikh materialov. – Almaty, VIII mezhdunarodny simpozium, 2013. – P. 156 (in Russian).
[9]. Ronald Guidotti, F.W. Reinhardt, E.V. Thomas. Deformation study of separator pellets for thermal batteries. SANDIA REPORT. New Mexico,1995. – P. 59 .
[10]. Ronald Guidotti, F.W. Reinhardt, E.V. Thomas. Characterization of MgO powders for use in thermal batteries. SANDIA REPORT. New Mexico, 1996. – P. 53.
[11]. N.V. Varenykh, V.N. Yemelyanov, V.V. Prosyanyuk, I.S. Suvorov, Pirotekhnichesky istochnik toka. – Patent: RU (11) 2320053 (13), RF, 2008 (in Russian).
[12]. Li W., Liu Zh.–Ch., Wang Sh.–J., International Workshop on Information and Electronics Engineering (IWIEE), Procedia Engineering 29 (2012) 1368–1372. <a href="https://doi.org/10.1016/j.proeng.2012.01.142">Crossref</a>
[13]. N.E. Holubowitch, Stephen E. Manek, James Landon, K. Liu., Power and Energy, ECS – The Electrochemical Society, Oct 8, 2014. <a href="https://doi.org/10.1149/06404.0439ecst">Crossref</a>
Downloads
Published
How to Cite
Issue
Section
License
You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.
Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).
Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.