Aerogels Based on Graphene Oxide with Addition of Carbon Nanotubes: Synthesis and Properties

Authors

  • F. R. Sultanov The Institute of Combustion Problems, 050012, Bogenbay batyr str., 172, Almaty, Kazakhstan; Al-Farabi Kazakh National University, 050040, al-Farabi ave., 71, Аlmaty, Kazakhstan
  • Shin-Shem Steven Pei University of Houston, Center for Advanced Materials, 77204-5062 Houston, USA
  • M. Auyelkhankyzy Institute of Combustion Problems, Bogenbai Batyr st., 172, Almaty, Kazakhstan; al-Farabi Kazakh National University, al-Farabi av. 71, Almaty, Kazakhstan
  • G. Smagulova Institute of Combustion Problems, Bogenbai Batyr st., 172, Almaty, Kazakhstan; al-Farabi Kazakh National University, al-Farabi av. 71, Almaty, Kazakhstan
  • B. T. Lesbayev Institute of Combustion Problems, Bogenbai Batyr st., 172, Almaty, Kazakhstan; al-Farabi Kazakh National University, al-Farabi av. 71, Almaty, Kazakhstan
  • Z. A. Mansurov Institute of Combustion Problems, Bogenbai Batyr st., 172, Almaty, Kazakhstan; al-Farabi Kazakh National University, al-Farabi av. 71, Almaty, Kazakhstan

DOI:

https://doi.org/10.18321/ectj9

Abstract

Nowadays numerous sorbents based on graphene and other carbon nanomaterials have been synthesized for the removal or collecting of oil remains due to its unique physico-chemical properties. Obtaining of aerogels based on graphene oxide and carbon nanotubes with addition of chitosan solution as a binder component is shown in this paper. Aerogels were synthesized by reduction of aqueous dispersion of graphene oxide using the reducing agents, followed by ultrasonic and thermal treatment. Ultrasound destroys the graphene layers, decreasing them in size, thereby exposing new layers to form edges that already have no stabilizing carboxyl groups, which are located at the edges, and participate in the formation of bonds. The surface morphology of obtained aerogels was studied by SEM. The study of the sorption capacity showed that graphene/CNTs aerogel is characterized by short absorption time and high sorption ability that depend on densities of the used solvents. All experimental results show the possibility of using the aerogels based on graphene and CNTs as sorbents for collection of oil residues.

References

[1]. Y. Hanzawa, K. Kaneko, R. Pekala, M.Dresselhaus, Langmuir 12 (1996) 6167–6169.

[2]. J. Wang, M.W. Ellsworth, ECS Trans.19 (2009) 241–247.

[3]. Yirong Lin, Gregory J. Ehlert, Colton Bukowsky, Henry A. Sodano, ACS Appl. Mater. Interfaces. 3 (2011) 2200–2203.

[4]. Yuqiang Qian, Issam M. Ismail, Andreas Stein. Carbon, 68 (2014) 221–231.

[5]. Chih-Feng Wang, Sheng-Jhih Lin, ACS Appl. Mater. Interfaces 5 (18) (2013) 8861-8864.

[6]. Kyu Hun Kim, Youngseok Oh, M.F. Islam. Nature Nanotech. 7 (2012) 562–566.

[7]. Wufeng Chen, Lifeng Yan, Nanoscale 3 (8) (2011) 3132–3137.

[8]. L. Zhang, G. Chen, M.N. Hedhili, H. Zhang, P. Wang, Nanoscale 4 (2012) 7038−7045.

[9]. L. Feng, Z. Zhang, Z. Mai, Y. Ma, B. Liu, L. Jiang, D. Zhu, Angew. Chem. Int. Ed. 116 (2004) 2046–2048.

Downloads

Published

2014-11-10

How to Cite

Sultanov, F. R., Pei, S.-S. S., Auyelkhankyzy, M., Smagulova, G., Lesbayev, B. T., & Mansurov, Z. A. (2014). Aerogels Based on Graphene Oxide with Addition of Carbon Nanotubes: Synthesis and Properties. Eurasian Chemico-Technological Journal, 16(4), 265–269. https://doi.org/10.18321/ectj9

Issue

Vol. 16 No. 4 (2014)

Section

Articles

License

You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.

Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.

Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).

Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.

Most read articles by the same author(s)

1 2 3 4 5 6 > >>