Spongy Structures Coated with Carbon Nanomaterials for Efficient Oil/Water Separation

Authors

  • F. S. Sultanov Institute of Combustion Problems, Almaty Kazakhstan; al-Farabi Kazakh National University, al-Farabi av. 71, 050040 Almaty
  • B. Bakbolat Institute of Combustion Problems, Almaty, Kazakhstan
  • Z. A. Mansurov Institute of Combustion Problems, Almaty Kazakhstan; al-Farabi Kazakh National University, al-Farabi av. 71, 050040 Almaty http://orcid.org/0000-0002-8956-216X
  • Z. M. Azizov Institute of Combustion Problems, Almaty Kazakhstan
  • S. S. Pei University of Houston, Center for Advanced Materials, Houston United States
  • R. Ebrahim University of Houston, Center for Advanced Materials, Houston, United States
  • Ch. Daulbayev Institute of Combustion Problems, Almaty Kazakhstan; al-Farabi Kazakh National University, al-Farabi av. 71, 050040 Almaty
  • A. A. Urazgaliyeva Institute of Combustion Problems, Almaty, Kazakhstan
  • M. I. Tulepov Institute of Combustion Problems, Almaty Kazakhstan; al-Farabi Kazakh National University, al-Farabi av. 71, 050040 Almaty

DOI:

https://doi.org/10.18321/ectj286

Keywords:

sponge, polyurethane, melamine, multiwalled carbon nanotubes, sorption, hydrophobicity

Abstract

Rapid progress of processing and transportation of oil and petroleum products may cause disaster for environment like oil spill. Oil booms, combustion, and oil skimmer vessels are usually used to clean up the oil spill, but often with poor efficiency and even with undesirable environmental side effects. With obtaining of carbon nanomaterials (CNMs) (graphene, carbon nanotubes) and developing inexpensive technologies for their synthesis it has become perspective to use them for creation of 3D structures which may serve as a hydrophobic sorbents for oil and petroleumproducts. In this study, sponges coated with carbon nanomaterials were obtained using “dip-coating” method. Walls of commercially available polyurethane (PU) and melamine sponges were coated with reduced graphene oxide (rGO) and multiwalled carbon nanotubes (MWCNTs). The resulting sponges are characterized by excellent mechanical properties, they are superhydprophobic, and they fully repel water and at the same time selectively absorb oil and organic liquids of different densities. We believe that superhydrophobic and superoleophilic sponges, the walls of which are coated with CNMs, are perspective candidates for reusable sorbents for collection of oil and petroleum products from the surface of water and moreover due to its excellent mechanical properties they can serve as a hydrophobic filtering materials for separation of oil from the surface of water.

 

References

[1]. Y.X. Xu, K.X. Sheng, C. Li, G.Q. Shi, ACS Nano. 4 (2010) 4324‒4330. <a href=" http://doi.org/10.1021/nn101187z">Crossref</a>

[2]. F.R. Sultanov, S.S. Pei, M. Auyelkhankyzy, G. Smagulova, B.T. Lesbayev, Z.A. Mansurov, Euras. Chem. Tech. J. 16 (2014) 265‒269. <a href=" http://doi.org/10.18321/ectj9">Crossref</a>

[3]. H. Hu, Z. Zhao, W. Wan, Y. Gogotsi, J. Qiu, Adv. Mater. 16 (2013) 194‒204. <a href=" http://doi.org/10.1002/adma.201204530">Crossref</a>

[4]. A.E. Aliev, J. Oh, M.E. Kozlov, A.A. Kuznetsov, S. Fang, A.F. Fonseca, R. Ovalle, M.D. Lima, M.H. Haque, Y.N. Gartstein, M. Zhang, A.A. Zakhidov, and R.H. Baughman, Science 323 (2009) 1575‒1578. <a href=" http://doi.org/10.1126/science.1168312">Crossref</a>

[5]. M.B. Bryning, D.E. Milkie, M.F. Islam, L.A. Hough, J.M. Kikkawa, A.G. Yodh, Adv. Mater. 19 (2007) 661‒664. <a href=" http://doi.org/10.1002/adma.200601748">Crossref</a>

[6]. F.R. Sultanov, Z.A. Mansurov, S.S. Pei, S.C. Chang, S. Xing, F. Robles-Hernandez, Y.W. Chi, K.P. Huang. Advances in Science and Technology 98 (2017) 131‒135. <a href=" http://doi.org/10.4028/www.scientific.net/AST.98.131">Crossref</a>

[7]. Jihao Li, Jingye Li, Hu Meng, Siyuan Xie, Bowu Zhang, Linfan Li, Hongjuan Ma, Jianyong Zhang and Ming Yu, J. Mater. Chem. A. 2 (2014) 2934‒2941. <a href=" http://doi.org/10.1039/C3TA14725H">Crossref</a>

[8]. H. Hu, Z. Zhao, W. Wan, Yu. Gogotsi, J. Qiu, Environ. Sci. Technol. Lett. 1 (2014) 214‒220. <a href=" http://doi.org/10.1021/ez500021w">Crossref</a>

[9]. K. Shervin, N.H. Diana, A. Tariq, L. Dusan, Carbon 80 (2014) 523‒533. <a href=" http://doi.org/10.1016/j.carbon.2014.08.092">Crossref</a>

[10]. F.R. Sultanov, Z.A. Mansurov, Chemical Bulletin of Kazakh National University 78 (2014) 67‒82. <a href=" http://doi.org/10.153.28/chemb_2014_467-82">Crossref</a>

[11]. B. Ge, Zh. Zhang, X. Zhu, X. Men, X. Zhou, Colloids Surf., A 457 (2014) 397‒401. <a href=" http://doi.org/10.1016/j.colsurfa.2014.06.020">Crossref</a>

[12]. C.P. Ruan, K.L. Ai, X.B. Li, L.H. Lu, Angew Chem. Int. Ed. 22 (2014) 5556‒5560. <a href=" http://doi.org/10.1002/anie.201400775">Crossref</a>

[13]. W.S.Jr. Hummers, R.E. Offerman, J. Am. Chem. Soc. 80 (1958) 1339. <a href=" http://doi.org/10.1021/ja01539a017">Crossref</a>

[14]. Y. Zhu, S. Murali, W. Cai, X. Li, J. W. Suk, J. R. Potts and R.S. Ruoff. Adv. Mater. 22 (2010) 3906–3924. <a href=" http://doi.org/10.1002/adma.201001068">Crossref</a>

[15]. C. Wu, X.Y. Huang, X.F. Wu, R. Qian, P.K. Jiang. Adv. Mater. 25 (39) (2013) 5658–5662. <a href=" http://doi.org/10.1002/adma.201302406">Crossref</a>

[16]. D.D. Nguyen, N-H. Tai, S-B. Lee, W.-Sh. Kuo. Energy Environ. Sci. 5 (2012) 7908–7912. <a href=" http://doi.org/10.1039/c2ee21848h">Crossref</a>

Downloads

Published

2017-06-30

How to Cite

Sultanov, F. S., Bakbolat, B., Mansurov, Z. A., Azizov, Z. M., Pei, S. S., Ebrahim, R., … Tulepov, M. I. (2017). Spongy Structures Coated with Carbon Nanomaterials for Efficient Oil/Water Separation. Eurasian Chemico-Technological Journal, 19(2), 127–132. https://doi.org/10.18321/ectj286

Issue

Vol. 19 No. 2 (2017)

Section

Articles

License

You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.

Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.

Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).

Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.

Most read articles by the same author(s)

<< < 1 2 3 4 5 6 > >>