Investigation of the Sorption Properties of Ore Materials for the Removal of Sulfur Dioxide from Exhaust Flue Gases of Power Plants

Authors

  • N. V. Shikina Boreskov Institute of Catalysis, pr. Akad. Lavrentieva, 5, Novosibirsk, 630090, Russia
  • S. R. Khairulin Boreskov Institute of Catalysis, pr. Akad. Lavrentieva, 5, Novosibirsk, 630090, Russia
  • N. A. Rudina Boreskov Institute of Catalysis, pr. Akad. Lavrentieva, 5, Novosibirsk, 630090, Russia
  • T. N. Teryaeva F.T. Gorbachev Kuzbass State Technical University, Kemerovo, 650000, Russia
  • E. S. Mikhaylova Institute of Coal Chemistry and Materials Science, Pr. Sovetskiy, 18, Kemerovo, 650000, Russia
  • Z. R. Ismagilov Boreskov Institute of Catalysis, pr. Akad. Lavrentieva, 5, Novosibirsk, 630090, Russia

DOI:

https://doi.org/10.18321/ectj204

Abstract

The prospects of using a natural material – ferromanganese nodules (FMN) from the Gulf of Finland – as the SO2 adsorbent are discussed. The starting material was studied as pellets and powder using X-ray fluorescence spectroscopy, XRD, BET, and mechanical strength analysis; dependences of physicochemical parameters of the material on heat treatment at 100-1000 ºC were found. FMN samples were tested in the process of SO2 sorption. The sorptive capacity of FMN samples for SO2 was found to increase with humidity of adsorbents; FMN samples with a humidity above 40% were shown to be promising for the removal of sulfur dioxide from gases

References

[1]. G.K. Boreskov, E.A. Levitsky, Z.R. Ismagilov, Journal of the All-Union Mendeleev Chemical Society, Vol. XXIX, 4 (1984) 379–385.

[2]. Z.R. Ismagilov, M.A. Kerzhentsev, Journal of the All-Union Mendeleev Chemical Society, Vol. XXXV, 1 (1990) 43–53.

[3]. Z.R. Ismagilov, M.A. Kerzhentsev, Catal. Rev. Sci.& Eng. 32 (1-2) (1990) 51–103.

[4]. Z.R. Ismagilov, M.L. Schipko, S.V. Bogomolov, M.A. Kerzhentsev, Chemistry For Sustainable Development 4 (6) (1996) 473–480.

[5]. L.A.C. Tarelho, M.A.A. Matos, F.J.M.A. Pereira, Fuel Process. Technol. 86 (12–13) (2005) 1385–1401.

[6]. F.N. Ridha, V. Manovic, A. Macchi, E.J. Anthony, Appl. Energy. 92 (2012) 415–420.

[7]. L. Yan, X. Lu, Q. Wang, Y. Kang, J. Xu, Ye. Chen, Appl. Therm. Eng. 65 (2014) 487–494.

[8]. A. Ansari, A. Bagreev, T.J. Bandosz, Carbon 43 (5) (2005) 1039–1048.

[9]. T.J. Bandosz, K. Block, Ind. Chem. Eng. Res. 45 (10) (2006) 3666–3672.

[10]. A. Bagreev, T.J. Bandosz, J. Colloid Interface Sci. 252 (2002) 188–194.

[11]. A. Bagreev, S. Bashkova, D.C. Locke, T.J. Bandosz, Sewage Sludge Derived Materials as Adsorbents for H2S and SO2. // Fundamentals of Adsorption -7, K. Kaneko, H. Kanoh, Y. Hanzawa Eds., IK International, Chiba, Japan. 2002. P. 239.

[12]. S. Bashkova, A. Bagreev, D.C. Locke, T.J. Bandosz, Environ. Sci. Technol. 35 (2001) 3263-3269.

[13]. F.L. Malikov, I.P. Mukhlenov, M.S.Mirzarakhimov, Journal of Applied Chemistry, 1981. Vol.64. P.2296.

[14]. RF patent 2164445, 2001.

[15]. H.T. Jang, S.B. Kim, D.S. Doh, Korean J. Chem. Eng. 20 (1) (2003) 116–120.

[16]. Y.I. Yoon, M.W. Kim, Y.S. Yoon, S.H. Kim, Chem. Eng. Sci. 58 (10) (2003) 2079–2087.

[17]. S.K. Jeong, T.S. Park, S.C. Hong, J. Chem. Techn.& Biotechn. 76 (10) (2001) 1080–1084.

[18]. M. Nitta, Appl. Catal. 9 (1984) 151–176.

[19]. US Patent 3330096, 1967.

[20]. A.I. Romanchuk, V.P. Ivanovskaya, T.N. Matevich, A.B. Korolev, Ores and Metals. 1995. No.4. P.100.

[21]. A.M. Ivanova, A.N. Smirnov, V.S. Rogov, A.P. Motov, N.S. Nikolskaya, K.V. Palshin, Mineral Resources of Russia 6 (2006) 14–19.

[22]. Z.R. Ismagilov, S.R. Khairulin, S.A. Yashnik, I.V. Ilyukhin, V.N. Parmon, Catalysis in Industry, 2008, special issue. P. 73–79.

Downloads

Published

2015-04-10

How to Cite

Shikina, N. V., Khairulin, S. R., Rudina, N. A., Teryaeva, T. N., Mikhaylova, E. S., & Ismagilov, Z. R. (2015). Investigation of the Sorption Properties of Ore Materials for the Removal of Sulfur Dioxide from Exhaust Flue Gases of Power Plants. Eurasian Chemico-Technological Journal, 17(2), 137–137. https://doi.org/10.18321/ectj204

Issue

Vol. 17 No. 2 (2015)

Section

Articles

License

You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.

Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.

Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).

Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.

Most read articles by the same author(s)

<< < 1 2 3 4 > >>