Highly Porous Carbon Materials Filled with Nickel Hydroxide Nanoparticles; Synthesis, Study, Application in Electrochemistry

Authors

  • Yu. A. Zakharov Institute of Coal Chemistry and Materials Science SB RAS, Russia, 650000 Kemerovo
  • A. N. Voropay Institute of Coal Chemistry and Materials Science SB RAS, Russia, 650000 Kemerovo
  • N. M. Fedorova Kemerovo State University, 650043 Kemerovo, Russia
  • V. M. Pugachev Kemerovo State University, 650043 Kemerovo, Russia
  • A. V. Puzynin Institute of Coal Chemistry and Materials Science SB RAS, Russia, 650000 Kemerovo
  • Ch. N. Barnakov Institute of Coal Chemistry and Materials Science SB RAS, Russia, 650000 Kemerovo
  • Z. R. Ismagilov Institute of Coal Chemistry and Materials Science SB RAS, Russia, 650000 Kemerovo
  • T. S. Manina Center for collective use of Kemerovo Scientific Center SB RAS, 650000 Kemerovo, Russia

DOI:

https://doi.org/10.18321/ectj243

Keywords:

Nickel hydroxide, porous carbon, composite, supercapacitor

Abstract

Nickel hydroxide was deposited on the surface of the porous carbon to obtain a cathode material for  supercapacitors. This work is the first part of the study of Ni(OH)2/С composite, which considers the conditions of its synthesis using two types of porous carbon matrices with a highly developed specific surface area (1000–3000 m2/g) and two types of precursors (NiCl2*6H2O and Ni(N3)2). The morphology of the systems, in particular the shape and size characteristics of the hydroxide filler particles, was examined using the scanning electron microscopy, X-ray diffraction, and nitrogen adsorption-desorption at 77 K. The measurements of capacity of the Ni(OH)2/С-electrodes were made in 6 M KOH using an asymmetric two-electrode cell (a porous carbon material with known electrode characteristics was employed as the counter electrode). The capacity was shown to decrease by 22–56% with increasing the scanning rate from 10 to 80 mV/s. A maximum capacity of the composite was obtained at a scanning rate of 10 mV/s was 346 F/g.

References

[1]. L. Cao, F. Xu, Y.Y. Liang, H.L. Li, Adv. Mater. 16 (2004) 1853–1857.

[2]. D.D. Zhao, W.J. Zhou, H.L. Li, Chem. Mater. 19 (2007) 3882–3891.

[3]. A. Burke, J. Power Sources 91 (2000) 37–50.

[4]. Mustafa Aghazadeh, Mehdi Ghaemi, Behrouz Sabour, Somayeh Dalvand, J. Solid State Electrochem. 18 (2014) 1569–1584.

[5]. G. Wang, L. Zhang, J. Zhang, Chem. Soc. Rev. 41 (2012) 797–828.

[6]. J.L. Zhang, H.D. Liu, L.H. Huang, S.Z. Tan, W.J. Mai, X. Cai, J. Solid State Electrochem. 19 (2015) 229–239.

[7]. Duanguang Yang, Fan Wang, Jing Yan, Yong Gao, Huaming Li, J. Nanopart. Res. 15 (2013) 1762–1775.

[8]. Junyi Ji, Li Li Zhang, Hengxing Ji, Yang Li, Xin Zhao, Xin Bai, Xiaobin Fan, Fengbao Zhang, and Rodney S. Ruoff, ACS Nano. 7 (2013) 6237–6243.

[9]. Guang-Wu Yang, Cai-Ling Xu and Hu-Lin Li, Chem. Commun. 48 (2008) 6537–6539.

[10]. Wen-Jia Zhou, Mao-Wen Xu, Dan-Dan Zhao, Cai-Ling Xu, Hu-Lin Li, Microporous and Mesoporous Materials 117 (2009) 55–60.

[11]. H.L. Wang, J.T. Robinson, G. Diankov, H.J. Dai, J. Am. Chem. Soc. 132 (2010) 3270–3271.

[12]. Ye.M. Tayts, I.A. Andreyeva. Methods for analysis and testing of coal. Nedra, Moscow 1983, р. 300.

[13]. T.S. Manina, N.I. Fedorova, S.A. Semenova, Z.R. Ismagilov. Coke and Chemistry 55 (2012) 429–431.

[14]. Ch.N. Barnakov, A.P. Kozlov, S.K. Seit-Ablaeva, V.B. Fenelonov, S.V. Cherepanova, Z.R. Ismagilov,
V.N. Parmon. Petroleum Chemistry 44 (2004) 403–406.

[15]. B.K. Vaynshteyna, Modern Crystallography. Science. Moscow, Vol. 1, 1979, р 384.

[16]. S. Chen, J. Zhu, X. Wu, Q. Han, X. Wang, ACS Nano 4 (2010) 2822–2830.

[17]. U.M. Patil, K.V. Gurav, V.J. Fulari, C.D. Lokhande, Oh Shim Joo, J. Power Sources 188 (2009) 338–342.

[18]. A.S. Vyacheslavov, E.A. Pomerantseva, Measurement of surface area and porosity by capillary condensation of nitrogen, Moscow, 2006, p 55.

[19]. Yu.A. Zakharova, Z.R. Ismagilova, V.M. Pugachev, A.N. Voropai, R.P. Kolmykov, V.G. Dodonov, T.S. Manina, Ch.N. Barnakov, A.V. Samarov, Inorg. Mater. 4 (2015) 405–411.

Downloads

Published

2015-07-20

How to Cite

Zakharov, Y. A., Voropay, A. N., Fedorova, N. M., Pugachev, V. M., Puzynin, A. V., Barnakov, C. N., … Manina, T. S. (2015). Highly Porous Carbon Materials Filled with Nickel Hydroxide Nanoparticles; Synthesis, Study, Application in Electrochemistry. Eurasian Chemico-Technological Journal, 17(3), 187–191. https://doi.org/10.18321/ectj243

Issue

Vol. 17 No. 3 (2015)

Section

Articles

License

You are free to: Share — copy and redistribute the material in any medium or format. Adapt — remix, transform, and build upon the material for any purpose, even commercially.

Eurasian Chemico-Technological Journal applies a Creative Commons Attribution 4.0 International License to articles and other works we publish.

Subject to the acceptance of the Article for publication in the Eurasian Chemico-Technological Journal, the Author(s) agrees to grant Eurasian Chemico-Technological Journal permission to publish the unpublished and original Article and all associated supplemental material under the Creative Commons Attribution 4.0 International license (CC BY 4.0).

Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.

Most read articles by the same author(s)

<< < 1 2 3 4 > >>